Leica Geosystems RCS1100 Series - Manual (Page 32)

32 Safety directions RCS1100-1.2.0en
5
7
6
Safety directions
The following directions should
enable the person responsible for
the RCS1100, and the person who
actually uses the instrument, to
anticipate and avoid operational
hazards.
The person responsible for the
instrument must ensure that all users
understand these directions and
adhere to them.
Permitted uses
The RCS1100 is intended for the
following applications:
• Starting of the RCS1100
• Remote control of TPS models
• Recording, editing and managing
of measurements
• Data transmission to external
appliances (transparent mode)
• Running of applications programs
• Transmitting and receiving
measurements
Intended use of instrument
Prohibited uses
• Activation of the RCS1100 without
previous instruction
• Use outside of the intended limits
• Disabling safety systems and rem-
oval of hazard notices
• Opening the instrument using
tools (screwdriver, etc.), unless
this is specifically permitted for
certain functions
• Modification or conversion of the
instrument
• Activation after misappropriation
• Use with accessories from other
manufacturers without the prior
express approval of Leica Geosy-
stems (only the antennae provided
by Leica may be used)
• Inadequate protection at the
measurement location (e.g. when
carrying out measurements on
roads)
• Control of machines, objects in
motion or similar with the
RCS1100 Remote Control System