Leica Geosystems RCS1100 Series - Manual (Page 13)

13
RCS1100-1.2.0en Preparation,Setting up
6
Before packing up the RCS1100 and
the TCPS26 in the bag, unscrew the
antennae and remove the battery
from the RCS1100. For maximum
protection during transport, pack the
units as shown in the diagram. Your Leica Geosystems instrument is
operated with rechargable plug-in
batteries. The GEB111 is the
preferred battery for use with the
RCS1100, but the GEB121 may also
be used.
Only use batteries, charging
sets and accessories
recommended by Leica
Geosystems.
In order to fully exhaust
battery capacity it is
absolutely necessary with new
batteries to carry out 3 to 5 complete
charging/discharging cycles.
T100Z72
Batteries and chargers Packaging and transport
1100z06
GEB111 GEB121
After first charging of
batteries you can start
immediately with your job. As a
result, the batteries will be
discharged. Because the operating
time of the battery can be very short
until full capacity is reached it is
recommended to have ready a se-
cond battery and the GKL122 battery
charger. Using the charger, the
battery can be charged/discharged
several times before use.