Dillon EDXtreme (Red) - Manual (Page 36)

EDXtreme User Instructions 35
5.1.1 Config--Setup
The first soft key is Setup. Press this and you access the setup menu shown in Figure
4.1 . All its features are covered in that section of the manual.
5.1.2 EDX Config--Comm
Press the Comm key to enable or disable wired cell, Com1, and radio communication.
To configure wired cell or serial port:
1. Press Cell or COM 1.
The following display appears.
2. Select a transmission level using the Sel keys to enable as RS-232 or disable.
Choices are; Disabled (default), RS232. Press Enter to accept the setting.
See note below.
Comm
Cell COM 1 Radio
RS-232 activity consumes more battery power.
Enter
Trans Level: (*Disabled)
Sel Sel