Dillon EDXtreme (Red) - Manual (Page 28)

EDXtreme User Instructions 27
4.1 Setup Menu
Press the appropriate soft key shown in Figure 4.1 to accomplish the functions listed
on the following pages.
4.1.1 Setup--Ptfmt
Press the Ptfmt soft key to select the print format that will be sent to a peripheral printer
when you press the Print soft key. Choose from the formats below. Data sent is shown
below. The default is format #1.
Format #1 Current displayed value (peak or live force) plus unit of measure
11/19/13 (if enabled)
12:46:00 (if enabled)
104.5 lbf (live force example)
302.5 lbf (peak force example)
104.5 lbf (dual mode example)
302.5 lbf
Format #2 Live force value plus unit of measure on 1st line
Peak force and unit of measure on 2nd line
11/19/13 (if enabled)
12:46:00 (if enabled)
104.5 lbf
302.5 lbf
Format #3 Live force value plus unit of measure on 1st line
Peak force and unit of measure on 2nd line
Descriptive prefixes on each line
11/19/13 (if enabled)
12:46:00 (if enabled)
Force 104.5 lbf
Peak 302.5 lbf
Format #4 Fixed position output. Works well with RS-232 utilities, such as
WedgeLink, for parsing into a spreadsheet such as Microsoft Excel.
(comma separated)
Excel A B C D
1 104.5 lbf Date Time
2 302.5 lbf Date Time