Daiwa TANACOM 1000 - Manual (Page 28)

26
Winding speed display
In the default setting, the lower area counter displays the winding speed.
The chumming timer display area shows the remaining time until
the auto stop is reached. (p. 27)
The inverse counter numbers can be changed to indicate winding
speed.
Rate of speed indicated is meters per minute (m/min).
4.
Press the MODE BUTTON three times to show the water depth
on the display. The depth counter will then start to function.
2
1.
Press MODE BUTTON to show speed indicator display.
is shown on the screen.
In the default setting, the inverse counter is OFF.
2. Turn it ON with the power lever.
3.
Press the MODE BUTTON to display the next setting display.
1
3
4
Example)
100 m/min
Functional setting operation
(8. Winding speed indicator)