Daiwa TANACOM 1000 - Manual (Page 34)

32
Useful functions
Various alarms
Many kinds of information are indicated by audible alarms.
Display light
Backlighting of the display provides easy reading for early morning or night fishing.
Breaker display
Power lever alarm
- Placing the Power lever at MAX or OFF positions evokes an alarm.
Auto stop alarm
- While winding up, starting 6 m below the auto stop depth, an alarm beeps at two meter intervals. Upon reaching
the auto stop depth, a long alarm sounds.
Range memory alert
- While lowering your rig back into the strike zone, starting 6 m above the memorized strike depth, an alarm
sounds at two m intervals with a long alarm sounding once the target depth is reached.
(This range memory alarm does not sound unless line has been wound more than 6 m above the memorized
depth.)
Switch alarm
- Each time a button is pressed, a confirming beep is sounded.
Excessive voltage alarm
- Should you attach a power source with a voltage higher than the acceptable level, a continuous alarm will
sound. DO NOT operate the reel. Disconnect the power source. Connect a power source with the proper
voltage.
Timer alarm
- Chumming timer winding is indicated by an alarm.
- For safety, an excessively heavy load on the reel will activate the
circuit breaker system and stop automatic winding. While this
system is working, the display appears as shown on the right.
Backlighting of the display provides easy reading for early morning
or night fishing.
- As long as the reel is connected to a power source, the display
backlight is on.