Functional setting operation, Mode setting display) – Daiwa TANACOM BULL 750 User Manual

Page 20

Functional setting operation

(1. Mode setting display)

1.There are many useful functions in the mode

2.While the mode setting display is on, operate the power lever to change it to a desired value, and

then press the

MODE BUTTON

to complete the procedure.

How to set the many functions available

Press the

MODE BUTTON

to choose a display.

Each press of the

MODE BUTTON

changes the display to the

next function.

Holding the

MODE BUTTON

down, rapidly scrolls through the

displays, quickly getting you back to the depth display.

At each mode setting display, the default setting can be

retained by pressing the

RESET BUTTON

While letting out or winding line, the

MODE BUTTON

cannot be

used to change settings.

Power lever

MODE

BUTTON

MODE

BUTTON

MODE

BUTTON

MODE

BUTTON

MODE

BUTTON

Jigging range

Winding speed display

(Each display example is the default setting)

This is displayed when the

MODE BUTTON

(1) is set to pickup.

When it is set to jig, it displays the jigging pattern (2).

(It depends on the setting.)

Jig/pickup pattern

Jigging pattern

Jigging length

Pickup speed

Jig waiting time

(Select the indicator

of either the measured

winding speed or the

inverse counter.)