Line data input, Backing line 2---p3) – Daiwa TANACOM BULL 750 User Manual
Page 18
16
Line data input
(Backing line 2---P3)
This procedure is to enter the line length after it has been wound onto the reel. It is necessary that
you know the line length and that it is greater than 100m.
2
3
5
4.
Paying attention to the lineʼs color coding, pull 50m of line off of
the spool.
(The number of the counter above increases.)
1.
Turn the power on while the main line is wound up.
2.
Press the
MODE BUTTON
for more than 5 seconds while it is
indicating
0.0
.
It turns to P1 mode and
P1
blinks.
3.
Press the
MODE BUTTON
2 more times to display the display
of P3 Backing line 2.
It turns to P3 mode and
P3
blinks, with a display of
50
in the lower
part of the counter.
5.
Pull out 50 m of line and then press the
RESET BUTTON
for
more than 2 seconds.
This will show the digits
100
in the lower area of the counter.