5 configuring static unicast address, 6 configuring static multicast address – CANOGA PERKINS 9171 Configuration Guide User Manual
Page 34
CanogaOS Configuration Guide
6-2
DUT#configure terminal
Enter the Configure mode.
DUT#show mac address-table ageing-time
Display address aging time.
6.4.3 Validation
Commands
Bridge 1
DUT#show mac address-table ageing-time
MAC address table ageing time is 10 seconds
6.5 Configuring Static Unicast Address
Unicast address can be only bind to one port.
6.5.1 Topology
Figure 6-2: Static Unicast Address
6.5.2 Configurations
Bridge 1
DUT#configure terminal
Enter the Configure mode.
DUT(config)#mac-address-table 0000.1234.5678
forward eth-0-1 vlan 1
Add static unicast address.
DUT(config)#end
Exit to exec mode.
DUT#show mac address-table
Display MAC address table.
6.5.3 Validation
Commands
Bridge 1
DUT#show mac address-table
VLAN port mac fwd static security
1 eth-0-1 0000.1234.5678 1 1 0
6.6 Configuring Static Multicast Address
Multicast address can be bind to multi-port.
6.6.1 Topology
Figure 6-3: Static Multicast Address