CANOGA PERKINS 9161 Network Interface Device - Manual (Page 30)

10G 1 STATISTICS
Port Mode : Disabled
Port Up Time : 0 day 0 hour 26 min
STP BPDUs Txed : 0
STP BPDUs Rxed : 0
RST BPDUs Txed : 0
RST BPDUs Rxed : 0
MSTP BPDUs Txed : 0
MSTP BPDUs Rxed : 0
Figure 20. Global Spanning Tree Interface Statistics Screen
10G 1 STATUS
Port Identifier : 32769
Port Priority : 128
Port Forwarding State : Manual Forward
Port Role : Disabled
Port Path Cost : 0
Designated Root : 80 00 00 40 2a 01 10
Designated Port Cost : 0
Designated Bridge : 80 00 00 40 2a 01 10
Designated Port Identifier : 0
Topology Change Ack : 2
Port Hello Time : 2
Edge Port : False
Edge Port Status : False
Point to Point Mac Status : True
Figure 21. Global Spanning Tree Interface Status Screen
4.6.4 Lag Configuration
Use the Lag Configuration and Information screen to view and set Link Aggregation Protocol (Lag)
parameters for the 9161. See Figure 22. To access the Lag Information screen, follow these steps:
1. From the Switch Configuration menu, type 4, "Lag Configuration," and press .
2. At the Lag Configuration screen, type the number for an item and press , then type the
port number and press to select an option.
3. To return to the Switch Configuration menu, press .
LAG CONFIGURATION
CONFIGURED LAGS
1. Static Capability : disabled
2. View/Change Lag :
3. View Lag Stats :
4. Create Lag :
5. Delete Lag :
5. Main Menu
Figure 22. Lag Configuration Screen
9161 Network Interface Device 4-14