CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 41)

EdgeAccess Universal Chassis System
L351 10/100BASE Media Converter 4-22
2. From the Utilities menu, type
7
, "PING Generation," and press .
3. At the PING menu prompt, set the PING parameters, and press .
"
PING response received...
" indicates a good connection;
"
TIMEOUT: Unable to reach [IP address]...
" indicates a faulty connection.
4. To stop the PING , press .
4.10.2 Static ARP Table
Use the Static ARP Table to set specific IP and MAC addresses for up to 10 ports. See Figure 37.
STATIC ARP TABLE
IP Address MAC ADDRESS Port
1. 172.16.2.7 00-90-37-56-6C-34
2. 172.16.3.23 00-7C-25-33-57-9C
Figure 37. Static ARP Table Screen
To use view, set, or remove an address, follow these steps:
1. From the Main Menu, type
7
, "Utilities," and press .
2. From the Utilities menu, type
8
, "Static ARP Table," and press .
3. At the prompt, type
1
to add an entry or
2
to remove an entry, and follow the prompts.
4. To return to the Utilities menu, press .
4.10.3 Dynamic ARP Table
Use the Dynamic ARP Table to view the currently assigned IP and MAC addresses for various ports.
See Figure 38.
DYNAMIC ARP TABLE
IP Address MAC ADDRESS Port IP Address MAC ADDRESS Port
172.16.2.82 00-98-2C-BE-27-01 3
172.16.153.6 00-50-54-C3-33-41 4
172.16.142.1 00 90 27 4F D1 8D 3
Figure 38. Dynamic ARP Table Screen
To use view an address, follow these steps:
1. From the Main Menu, type
7
, "Utilities," and press .
2. From the Utilities menu, type
9
, "Dynamic ARP Table," and press .
3. To return to the Utilities menu, press .