CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 40)

EdgeAccess Universal Chassis System
L351 10/100BASE Media Converter 4-21
UTILITIES
1) Set Date and Time
2) Reset Configuration To Default
3) Reset Remote Configuration To Default
4) Remote Craft Port:
Enabled
5) Modem/Slip/PPP Baud Rate 19200
6) Modem Initialization String AT
7) PING generation
8) Static ARP Table
9) Dynamic ARP Table
Figure 35. Utilities Menu Screen
Table 9. Utilities Menu Options
Item Definition
1) Set Date and Time Change the time and date information for the modem if needed; if in
a chassis with a DMM, the DMM date and time overrides the L351
2) Reset Configuration
To Default
3) Reset Remote
Configuration To Default Restores all configurable settings to the defaults except for: date
and time; password; BOOTP; Telnet timeout
4) Remote Craft Port Enable or disable the console port on the remote module
5) Modem/Slip/PPP Baud
Rate Select the baud rate, 9600, 19200, 38400, 57600, or 115200 bps for
the modem/SLIP/PPP serial port
6) Modem Initialization
String The default string is "
AT
"
7) PING Generation Access the PING diagnostics screen
8) Static ARP Table Set or change specific IP and MAC addresses
9) Dynamic ARP Table View current IP and MAC addresses
4.10.1 PING Generation
Use the PING Generation screen to test the connection to a specific IP address. See Figure 36.
PING Generation
IP Address to PING: 0.0.0.0
PING count (1 to 255, 0 = forever):
0
Figure 36. PING Generation Screen
To use PING to check a connection, follow these steps:
1. From the Main Menu, type
7
, "Utilities," and press .