Figure 24. host table screen -12 – CANOGA PERKINS L351 10/100BASE Media Converter User Manual
Page 31
EdgeAccess Universal Chassis System
L351 10/100BASE Media Converter
4-12
Table 6. SNMP Configuration Parameters Description
Item
Description
1) Ethernet IP Address
Subnet Mask
Default Gateway
Enter the IP address for access through the Ethernet network, the
mask that sets the network ID part of the IP address, and the address
of the network node that connects to another network
2) SLIP/PPP IP Address
Enter the IP address for access through SLIP or PPP
3) Serial Port Config
Set the type of serial port connection: VT100, SLIP, or PPP
4) BOOTP
Enable this if the module needs to obtain its IP address from a
BOOTP server; when the unit has an IP address, disable BOOTP
5) Host Table
Access the Host Table screen (for standalone enclosure, only)
6) Trap Table
Access the Trap Table screen (for standalone enclosure, only)
8) Inband Management
Port
Set the port that will receive management packets; can be Ext. only,
User only, Both ports, or No Management
9) Management VLAN
Enable or disable the Management VLAN
10) Management VLAN
Number
Set the number for the VLAN; range is 0-4095
The SNMP agent allows access to up to 24 Host IP addresses listed in the Host Table. Set up the
Host information for the L351 on the Host Table screen. See Figure 24. To access the Host Table,
follow these steps:
1. From the SNMP Configuration menu, type
6
, Host Table, and press
screen appears.
2. To add a host, type
1
and press
parameters:
a. IP Address for the Host
b. Access level for the host; can be
1
, read;
2
, read/write;
3
, read/trap; or
4
, read/write/trap
c. Trap community string (up to 10 characters)
d. Trap port (use 162 with standard SNMP or use 163 with CanogaView)
3. To delete a host, type
2
and press
4. To return to the SNMP Configuration menu, press
HOST TABLE
Managing
Access
Trap
Trap
Managing
Access
Trap
Trap
Host
Level
Community Port
Host
Level
Community Port
------------------------------------
------------------------------------
172.16.142.20
4
public
162
Add or Delete a host entry (1=Add, 2=Delete from table):
Figure 24. Host Table Screen