CANOGA PERKINS L322 Fast Ethernet Media Converter - Manual (Page 20)

EdgeAccess Universal Chassis System
L322 Fast Ethernet Media Converters 4-2
Figure 6. New Connection in HyperTerminal
Step 4. At the Connect To dialog, Select the COM port from the Connect using drop down menu and
click OK. See Figure 7.
Figure 7. COM Port Selection Dialog
Step 5. At the COM Properties dialog, on the Port Settings tab, check for these selections (see Figure
8):
• Bits per second: 19200 bps
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: Hardware