Chemtronics Static Free Floor Finish ES567 User Manual
Technical data sheet, Static free, Floor finish

PRODUCT DESCRIPTION
Static Free
Floor Finish is a high gloss floor
finish designed to dissipate electrostatic
charges and prevent static generation, while
providing
protection and enhanced
appearance to a floor surface. It can be
applied to any hard floor surface, such as
vinyl, vinyl asbestos, rubber, linoleum and
other surfaces. Static Free
Floor Finish
eliminates the need for static control tiles or
antistatic floor mats. Static Free™ Floor
Finish dries in 30 minutes and is perfect for
cleanroom, electronic manufacturing,
assembly and test areas.
Provides a non-yellow high gloss floor
surface
Dissipates static build up on floor surfaces
Eliminates need for static control tiles
Dries in 30 minutes
Enhances the appearance of hard surfaces
Meets slip resistance standard ASTM D-
21.06
TYPICAL APPLICATIONS
Static Free
Floor Finish effectively
dissipates static electrical charges on floor
surfaces:
Vinyl Composition
Vinyl Asbestos
Rubber
Linoleum
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Appearance
White, Opaque
Liquid
Specific Gravity
(water = 1)
1.02
Appearance White, Opaque Liquid
Viscosity 18 cps @ RT
(Brookfield DVII, No.1 spindle @
100RPM)
Flash Point (TCC)
None
Surface Resistivity
(ANSI/ESD S7.1)
10
6
– 10
9
ohms
Static Decay PASS
(MIL-B-81705C) (Less than 1 Second)
Coverage 1500 – 2000 sq ft. per gallon
Shelf life 2 years
RoHS/WEEE
Status
COMPATIBILITY
Static Free
Floor Finish is generally
compatible with most materials used in
commercial/industrial applications. As with
any chemical product, component
compatibility must be determined on a non-
critical area prior to use.
TDS # 0167
CHEMTRONICS
Technical Data Sheet
Static Free
Floor Finish