Chemtronics CircuitWorks® Boron Nitride Heat Sink Grease CW7250 - Manual

PRODUCT DESCRIPTION
CircuitWorks

Boron Nitride Heat Sink
Grease facilitates heat transfer away from
electrical/electronic components and into
heat sinks.
The material exhibits
exceptionally high thermal conductivity with
outstanding dielectric properties
(nonconductive). CircuitWorks

Boron
Nitride Heat Sink Grease shows no creep or
migration over a wide temperature range. The
grease contains an efficient heat conducting
filler that enhances the effectiveness of heat
sinks on electrical/electronic equipment.
 Exceeds MIL-C-47113 for thermal
conductivity
 Noncorrosive
 High dielectric strength
 Stable from -73
°C to 200°C
 Nonflammable
TYPICAL APPLICATIONS
CircuitWorks

Boron Nitride Heat Sink
Grease may be used for electronics
applications including:
 Effective Thermal Coupler for any
Heat Sink Device
 Nonflammable Protective Coating
 High Voltage Corona Protection
 Excellent for Improving Readings on
Contact Type Thermocouples
 Ideal for Silicone Sensitive
Environments
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Color White
Specific Gravity @ 25
°C
( 77
°F) 1.5
Usable Temperature
Range
-73
°
C/-99.4
°
F
to 200
°
C/392
°
F
Dielectric Strength, volts/mil 400
Dielectric Constant @ 100 Hz 2.2
Dissipation Factor @ 100 Hz 0.002
Volume Resistivity, ohm-cm 1 x 10
12
Arc Resistance, seconds 120
Thermal Conductivity,
Cal-cm/sec-cm
2
-
°C 4.4 x 10 -3
BTU-in/hr-ft
2
-
°F 12.35
W/m
°K 1.85
Shelflife 5 years
RoHS Compliant
COMPATIBILITY
CircuitWorks

Boron Nitride Heat Sink
Grease is generally compatible with most
materials used in printed circuit board
fabrication.
CHEMTRONICS
Technical Data Sheet
CircuitWorks

Boron Nitride Heat Sink Grease
CW7250