Chemtronics 152a Duster ES1027 - Manual

PRODUCT DESCRIPTION
152a Duster is an economical, medium
pressure duster that removes particulates from
many hard surfaces. Ideal for use on
keyboards, electronic hardware, and housings,
152a Duster will quickly and efficiently
remove light dust and debris. This duster is
residue-free and won’t scratch delicate
surfaces. Not for use near flames, ignition
sources, nor sources of static discharge.
 Contains no ozone depleting compounds
 Flammable
 Leaves no residue
 63 psig at 70
o
F
 Nonabrasive
 Excellent material compatibility
 Penetrates hard to reach areas
TYPICAL APPLICATIONS
Duster is engineered for all phases of
electronic equipment maintenance and is
particularly suited for applications involving:
 Audio/Video Equipment
 Fax Machines
 Keyboards
 Laboratory Instruments
 Microcomputers
 Photo Equipment
 Printers
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point -15.0
°F
Vapor Density (air=1)
@ 77
°F
2.4
Solubility in Water
@ 77
°F F/1 atm
0.15% by weight
Specific Gravity
(water = 1 @77
°F)
1.22
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless Gas
Odor Slight Ethereal
Flammable limits in
Air, % by Volume LEL : 3.9
UEL : 16.9
Flash Point (TCC) <-50 C (<-58 F)
Shelflife 5 years
COMPATIBILITY
152a Duster is generally compatible with
most materials used in printed circuit board
fabrication, including sensitive plastics and
compounds. As with any duster/cleaner,
compatibility must be determined on a non-
critical area prior to use.
CHEMTRONICS
Technical Data Sheet
152a Duster
TDS # 1027