Chemtronics CircuitWorks® Gold Guard™ Pen CW7400 - Manual

PRODUCT DESCRIPTION
CircuitWorks

Gold Guard
 Pen is
engineered to clean, lubricate and protect
gold, silver, platinum and other precious
metal contacts. CW7400 is a high
performance contact cleaner and lubricant
dispensed by a convenient marker pen
delivery system. The Gold Guard
 lubricant
offers protection from oxidation and corrosion
while improving contact and conductivity.
 Minimizes friction and metal wear
 Protects against oxidation and corrosion
 Nonabrasive
 Excellent Material Compatibility
 Removes oxides, dust and other
contaminants
 Lubricant remains stable up to 200 °C and
causes no electrical resistance.
TYPICAL APPLICATIONS
CircuitWorks

Gold Guard
 Pen is used in a
wide range of applications, including:
 Axial and Coaxial connections
 Cleans, lubricates and protects
 Laboratory instruments
 M/F connections
 Microcomputers
 Noble metal contacts
 PCB edge connectors
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point 207
°F
(Lubricant - 889°F /476°C)
Vapor Density (air=1) >1
Solubility in Water Negligible
Specific Gravity
(water = 1@77
°F)
0.80
Evaporation Rate 1
(butyl acetate=1)
Appearance Clear, Colorless Liquid
Odor Alcohol
Surface Tension
(dynes/cm @21.6
°C)
21
Flash Point (TCC)
Flammable 72
°F
(22
°C)
RoHS/WEEE
Status
COMPATIBILITY
The Gold Guard
 lubricant is compatible
with most materials used in the electronics
industry. With any chemical, compatibility
with components must be determined on a
non-critical area prior to use.
CHEMTRONICS
Technical Data Sheet
CircuitWorks

Gold Guard
 Pen
CW7400