Chemtronics Chem-Wik Rosin 7-50L - Manual

PRODUCT DESCRIPTION
Chem-Wik

Rosin is especially designed for
today’s heat sensitive electronic components.
The lighter mass, pure copper braid
construction allows for better thermal
conductivity, even at low temperatures.
Chem-Wik

Rosin responds as much as 50%
faster than conventional desoldering braids.
This design minimizes overheating and
requires less “contact” pressure for greater
operator control. All sizes are coated with a
Type “R” organic flux system.
 Requires little or no post solder cleaning
 No corrosive residues
 Optimized weave design for faster
wicking and heat transfer
 Halide free
 Minimal risk of heat damage to
components and circuit boards
TYPICAL APPLICATIONS
Chem-Wik

Rosin desoldering braid safely
removes solder from:
 Thru-hole Components
 Surface Mount Device Pads
 BGA Pads
 Micro Circuits
 Terminals
 Lugs and Posts
 Identification Script
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Chem-Wik

Rosin
Flux Type: Grade WW, Type “R”
Clean-up Required: No
Military Specifications: MIL-F-14256F
Shelf Life – 2 years from manufacturer
date
Part #
Size
Inches
Size
Metric
2-5L .030” .76mm
5-5L .050” 1.27mm
7-5L .075” 1.91mm
10-5L .100” 2.54mm
STATIC DISSIPATIVE PACKAGING
Static Dissipative packaging is available on
all 5 foot bobbins. The static dissipative
bobbins qualify as electrostatic discharge
protective per DOD Standard 1686 and DOD
Handbook 263. Meets the static delay rate
provision of MIL-B-81705C.
TDS # CWik
CHEMTRONICS
Technical Data Sheet
Chem-Wik

Rosin