Chemtronics CircuitWorks® 60 Minute Conductive Epoxy CW2460 - Manual

PRODUCT DESCRIPTION
The 60 Minute Conductive Epoxy is a two part,
silver epoxy used in prototype, repair and
general
solder-less conductive bonding
applications. It features strong mechanical
bonds, excellent electrical conductivity, and
extended pot life for increased work time.
Components can be easily placed and replaced
before full cure occurs. For accelerated cure,
simply heat material to 212
˚F (100˚C). This
conductive epoxy bonds aggressively to a wide
variety of materials.

Two-component product with simple mixing
ratios

60 minute work time offers increased
workability and extended pot life

Excellent electrical and thermal conductivity

High strength bond adheres dissimilar
surfaces

Operating temperature range from
-67
°F (-55°C) to 300°F (150°C)
TYPICAL APPLICATIONS
60 Minute Conductive Epoxy may be used for
electronics applications including:
 Conductive Bonds Between Heat Sensitive
Components
 Solderless Surface Mount Connections
 Circuit Board Trace Repair
 Static Discharge and Grounding
 Solder Repair
 Conductive Structural Adhesions
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Composition
Material Part A Adhesive
Part B Hardener
Color Part A Bright Silver
Part B Gray Silver
Silver content >75%
Cured Compound
Volume Resistivity <0.001 ohm-cm
Thermal Conductivity
Cal-cm/sec-cm
2
-
°C 3.8 x 10 -3
BTU-in/hr-ft
2
-
°F 11.0
W/m
°K 1.6
Operating Temperature -67
°
F to 300
°
F
Range (-55
°
C to 150
°
C)
Tensile Lap Shear >70-140 Kgm-cm
2
(ASTM D-1002) (>1000 to 2000 lbs/in
2
)
Shore D Hardness >70
Adhesion Excellent
Cured Flexibility Excellent
Chemical Resistance Excellent
Moisture Resistance Good
Typical Thickness 5 mil
Shelflife 12 months - Store at
temperatures below 120
° F
RoHS Compliant
TDS CW2460
CHEMTRONICS
Technical Data Sheet
60 Minute Conductive Epoxy