Chemtronics Konform Flexcoat CTFC5 - Manual (Page 7)

Konform® Flexcoat
The generation of waste should be avoided or minimized wherever possible. Disposal
of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to
the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Care should be taken when handling emptied containers that have not been
cleaned or rinsed out. Empty containers or liners may retain some product residues.
Vapor from product residues may create a highly flammable or explosive atmosphere
inside the container. Do not cut, weld or grind used containers unless they have been
cleaned thoroughly internally. Avoid dispersal of spilled material and runoff and contact
with soil, waterways, drains and sewers. Waste disposal
13. Disposal considerations
Disposal should be in accordance with applicable regional, national and local laws and regulations.
:
Refer to Section 7: HANDLING AND STORAGE and Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
for additional handling information and protection of employees.
14. Transport information
3 - DOT Classification
TDG Classification 3
Coating Solution II
1139 Coating Solution II
ADR/RID Class Coating Solution 3 II
IMDG Class Coating Solution 3 II
Coating Solution 1139 IATA-DGR Class 3
Regulatory
information UN number Proper shipping
name Classes PG* Label Additional
information
II
1139
1139
-
-
-
1139
-
Mexico
Classification 1139 Coating Solution 3 II -
PG* : Packing group
7/10 CTFC1, CTFC5, CTFC55 6/4/2013.