beautypg.com

Chemtronics Konform Flexcoat CTFC5 User Manual

Technical data sheet, Konform® flexcoat flexible conformal coating, Chemtronics

background image


PRODUCT DESCRIPTION

Konform

Flexcoat Conformal Coating is

designed for applications where flexibility and
protection are paramount. This material is as
flexible as an RTV silicone, but without the
disadvantages of a silicone. Providing a soft,
rubbery protective coating, this material will
coat evenly and provide a flexible and durable
protective barrier against humidity, salt,
corrosive vapors and fungus for printed circuit
board and electronic assemblies. This coating
can be removed by cutting a small section and
peeling the coating away from the surface, or by
solvent immersion of the whole board.

Coating

meets IPC-CC-830B Class B.

Extremely flexible silicone free conformal
coating

Clear, durable coating

Very good dielectric strength prevents arcing
and current leakage

Increases life of electronic assemblies

Will not discolor over time under normal use

Contains a UV indicator for Quality Control
inspection using medium intensity light at
265-335 nm

TYPICAL APPLICATIONS

Konform

Flexcoat Conformal Coating is ideal

for applications in:

 Data Communications
 Instrumentation
 Automotive Manufacturing
 Marine Manufacturing
 Process Control


TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES

Usable Temp. Range -31

°F to 212°F

of Cured Coatings (-35

°C to 100°C)

Tack Free Time 30 min.

Curing Conditions 24 Hours @ 77

°F (25°C)

(@ 80% R.H.) 8 Hours @ 150

°F (65°C)


Quick Cure
10 min. @RT
followed by 10 min @ 80°C

Specific Gravity 0.72
(Water=1) @ 68

°F (Liquid Only)

Viscosity (cps @ 77

°F) 24± 5 cps

Flash Point (TCC) 30

°F

Dielectric Strength 956 volts/mil

Dielectric Breakdown (volts/mil)
2550

Coverage 1 gallon 254.0
(1 mil/ft

2

) 12oz 20.2

Shelf life 2 years

RoHS Compliant

CARB & OTC

VOC Content

88.9% VOC

SCAQMD

VOC Content

640 g/L (liquid)

*Volatile Organic Compound (VOC) information is calculated on a
weight basis using the VOC definition of California Air Resources
Board (CARB) Consumer Product Regulations, South Coast Air
Quality Management District (SCAQMD) Rule 102 and the Federal
definition published in 40 CFR 51.100(s).

COMPATIBILITY

Konform

Flexcoat Conformal Coating is generally

compatible with most materials found on printed
circuit boards. As with any chemical product,

TDS # CTFC1

CHEMTRONICS

Technical Data Sheet

Konform® Flexcoat

Flexible Conformal Coating

This manual is related to the following products: