Chemtronics Konform SR High Viscosity CTSR-HV1 - Manual (Page 2)

Performance
Moisture Resistance Excellent
Removability Excellent
Ease of Repair Excellent
Flexibility Excellent
Adhesion Excellent
Abrasion Resistance Fair
Solvent Resistance Good
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Before applying Konform

SR High Viscosity
conformal coatings, clean circuit boards to
remove contamination and allow to dry.
Cleaning may be performed with Chemtronics
Electro-Wash

PX, Electro-Wash

CZ, or high
purity acetone.
SPRAY APPLICATION: Apply top to
bottom, allowing coating to flow evenly around
components. Rotate PCB 90
° and repeat
application. Rotate and apply coating two
additional times, then allow board to cure. If
additional thickness is desired, apply additional
coatings. When using liquid spray with
automatic dispensing equipment, adjustments
may be required in application rate and viscosity.
DIP APPLICATION: Using automatic
equipment or hand immersion technique, slowly
immerse PCB into the coating and remove
slowly. Use an average rate of approximately 1
foot per minute. After allowing the board to
cure, process may be repeated to achieve desired
thickness.
BRUSH APPLICATIONS: Evenly apply
coating to areas desired at thickness required.
Allow time for curing before reapplying to
achieve a thick coating. Use Chemask

to
protect components during conformal coating
process.
REMOVAL: After application, cured
Konform

SR High Viscosity may be removed
by soaking in Chemtronics

Electro-Wash

Two
Step, or an aromatic solvent (such as xylene), or
a short chain ketone (such as acetone).
AVAILABILITY
CTSR-HV1 1 Gal. Liquid
CTSR-HV5 5 Gal. Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-
TECH-401.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the
skills to evaluate and use the data properly.
CHEMTRONICS does not guarantee the
accuracy of the data and assumes no liability in
connection with damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. A (08/13)
Chemtronics
, Electro-Wash, Chemask 
,and Konform
 are
registered trademarks of Chemtronics. All rights reserved.
DISTRIBUTED BY: