Chemtronics Konform SR High Viscosity CTSR-HV1 User Manual
Technical data sheet, Konform, Sr high viscosity

PRODUCT DESCRIPTION
Konform
SR High Viscosity provides
maximum coverage where good flexibility is
required, or where extreme temperatures can
be encountered. This transparent coating
provides ideal protection for both rigid and
flexible printed circuit boards. Cured
coatings are hydrolyticly stable and retain
their physical electrical properties after high
temperature and humidity exposure.
Konform
SR High Viscosity will not stress
delicate circuit components.
Extends component life by protecting against
adverse environments
Good insulation properties, excellent
flexibility
Resists moisture, salt, fungus, corrosive
vapors, and severe environments
Engineered to withstand heat generated by
electronic circuitry as well as climatic
temperatures
Contains a UV indicator for thorough Quality
Control inspection
TYPICAL APPLICATIONS
Konform
SR High Viscosity is ideal for
applications in:
Aerospace
Data Communications
Instrumentation
Automotive Manufacturing
Marine Manufacturing
Process Control
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Usable Temp. Range (-85
°F to 390°F)
of Cured Coatings (-65
°C to 200°C)
Tack Free Time 30 Min. to 1 Hour
Curing Conditions 24 Hours @ 77
°F (25°C)
(@ 80% R.H.) 8 Hours @ 170
°F (77°C)
Specific Gravity 1.00
(Water=1) @ 68
°F
Viscosity (cps @ 77
°F) 120 cps
Flash Point (TCC) 60
°F
Volume Resistivity 1.5 x 10
16
(ohm/cm)
Dielectric Strength (volts/mil) 1100
Coefficient of Thermal 2.1 x 10
-4
Expansion (in/in/
°C)
Coverage 718.5
(2 mil/ft
2
)
Shelflife 1 year
COMPATIBILITY
Konform
SR High Viscosity is generally
compatible with most materials found on
printed circuit boards. As with any chemical
product, product/component compatibility
must be determined on a non-critical area
prior to use.
TDS # CTSRHV
CHEMTRONICS
Technical Data Sheet
Konform
SR High Viscosity