Exposure controls/personal protection, Physical and chemical properties, Stability and reactivity – Chemtronics Konform AR CTAR1 User Manual
Page 6: Toxicological information

KONFORM® AR (Liquid)
8. Exposure controls/personal protection
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
When there is a risk of ignition from static electricity, wear anti-static protective clothing.
For the greatest protection from static discharges, clothing should include anti-static
overalls, boots and gloves.
Skin
:
Environmental exposure
controls
:
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
>210°C (>410°F)
Liquid.
<1 [Air = 1]
1.6 kPa (12 mm Hg) [room temperature]
Fruity. Ethereal. [Strong]
Colorless.
Boiling/condensation point
>1 (butyl acetate = 1)
9. Physical and chemical properties
Physical state
Vapor pressure
Vapor density
Evaporation rate
Odor
Color
:
:
:
:
:
:
:
Flash point
:
Closed cup: -1.1111°C (30°F) [Tagliabue.]
The product is stable.
Reactive or incompatible with the following materials:
oxidizing materials strong alkalis
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition.
10. Stability and reactivity
Chemical stability
Conditions to avoid
Incompatible materials
Hazardous decomposition
products
:
:
:
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
11. Toxicological information
Acute toxicity
n-butyl acetate
LC50 Inhalation Gas.
Rat
390 ppm
4 hours
LD50 Dermal
Rabbit
>17600 mg/kg
-
LD50 Oral
Rat
10768 mg/kg
-
propyl acetate
LD50 Oral
Rat
9370 mg/kg
-
2-methoxy-1-methylethyl
acetate
LD50 Dermal
Rabbit
>5 g/kg
-
LD50 Oral
Rat
8532 mg/kg
-
butanone
LD50 Dermal
Rabbit
6480 mg/kg
-
LD50 Oral
Rat
2737 mg/kg
-
Product/ingredient name
Result
Species
Dose
Exposure
Conclusion/Summary
:
Not available.
Chronic toxicity
Conclusion/Summary
:
Not available.
Irritation/Corrosion
6/11
0708L
2/6/2014.