Chemtronics Konform AR CTAR1 - Manual (Page 10)

KONFORM® AR (Liquid)
15. Regulatory information
The following components are listed: BUTYL ACETATE; N-PROPYL ACETATE;
METHYL ETHYL KETONE (MEK) Massachusetts
Australia inventory (AICS): Not determined.
China inventory (IECSC): Not determined.
Japan inventory: Not determined.
Korea inventory: Not determined.
Malaysia Inventory (EHS Register): Not determined.
New Zealand Inventory of Chemicals (NZIoC): Not determined.
Philippines inventory (PICCS): Not determined.
Taiwan inventory (CSNN): Not determined.
International regulations
International lists :
:
Product name CAS number %
SARA 313 notifications must not be detached from the MSDS and any copying and redistribution of the MSDS shall
include copying and redistribution of the notice attached to copies of the MSDS subsequently redistributed.
butanone 78-93-3 5 - 10
butanone 78-93-3 5 - 10
Form R - Reporting
requirements
Supplier notification
Canada inventory : Not determined.
Chemical Weapons
Convention List Schedule
I Chemicals : Not listed
Chemical Weapons
Convention List Schedule
II Chemicals : Not listed
Chemical Weapons
Convention List Schedule
III Chemicals : Not listed
New York : The following components are listed: Butyl acetate; Methyl ethyl ketone; 2-Butanone
New Jersey : The following components are listed: n-BUTYL ACETATE; ACETIC ACID, BUTYL
ESTER; n-PROPYL ACETATE; ACETIC ACID, PROPYL ESTER; METHYL ETHYL
KETONE; 2-BUTANONE
Pennsylvania : The following components are listed: ACETIC ACID, BUTYL ESTER; ACETIC ACID,
PROPYL ESTER; 2-BUTANONE
State regulations
16. Other information
Hazardous Material
Information System (U.S.A.)
1
3
1
Health
Flammability
Physical hazards
FLAMMABLE LIQUID AND VAPOR. HARMFUL IF INHALED. MAY CAUSE EYE AND
SKIN IRRITATION. CONTAINS MATERIAL THAT MAY CAUSE TARGET ORGAN
DAMAGE, BASED ON ANIMAL DATA. Label requirements :
:
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.
1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS®
program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials may
be purchased exclusively from J. J. Keller (800) 327-6868.
10/11 0708L 2/6/2014.