Chemtronics Freeze Spray ES1052С - Manual (Page 2)

Material Compatibility
Buna-N Fair
Graphite Good
HDPE Good
LDPE Good
Lexan

Poor
Neoprene Good
Cross-Linked PE Good
Polyacrylate Poor
Polystyrene Good
PVC Good
Silicone Rubber Fair
Teflon

Good
Viton

Poor
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
No special surface preparation is required
prior to using Freeze Spray. Direct spray
onto the area to instantly cool components,
circuit boards or adhesives.
AVAILABILITY
ES1052 10 oz. Aerosol
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401
.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 0.0%
HCFC 0.0% HFC 100.0%
CL Solv. 0.0% ODP 0.0
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U.S. Clean Air Act of 1990. The ODP of
this product is zero. It is the sum of the ODP of the
substances that may contribute to the depletion of
stratospheric ozone, based upon the weight of each
substance in the product’s formulation.
NOTE:
This information is believed to be accurate. It is intended
for professional end users having the skills to evaluate and
use the data properly. CHEMTRONICS does not
guarantee the accuracy of the data and assumes no liability
in connection with damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. E (08/13)
DISTRIBUTED BY: