Chemtronics Freeze Spray ES1052С - Manual

PRODUCT DESCRIPTION
Freeze Spray is engineered for locating
thermal intermittent electrical components
and cooling printed circuit boards. This
circuit refrigerant system is nonflammable,
residue-free and provides fast cooling action.
 Nonflammable
 High heat transfer
 Low static generation
 Noncorrosive
 Lowers temperature to -60
°F (51°C)
 Ultra pure
 Leaves no residue
 Nonabrasive on most surfaces
TYPICAL APPLICATIONS
Freeze Spray can be used to:
 Cool Equipment for Testing
 Dissipate Heat While Soldering or
Desoldering
 Isolate Thermal Intermittent
Components
 Test Circuit Traces for Continuity
 Test Printed Circuit Boards for Stress
Fractures
 Track Intermittent Failures and Shorts
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point -15.7
°F
Vapor Density (air=1)
@ 77
°F
3.18
Solubility in Water
@ 77
°F /1 atm
0.10% by weight
Specific Gravity
(water = 1 @77
°F)
1.21
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless
Liquified Gas
Odor Slight Ethereal
Surface Tension
(dynes/cm @ 77
°F)
7.8
Flash Point (TCC) None
Shelflife 5 years
COMPATIBILITY
Freeze Spray is generally compatible with
most materials used in printed circuit board
fabrication, including sensitive plastics and
compounds. With any circuit refrigerant,
compatibility must be determined on a non-
critical area prior to use.
TDS # 1052
CHEMTRONICS
Technical Data Sheet
Freeze Spray