Chemtronics Flux-Off No Clean Plus ES896BE - Manual (Page 2)

Material Compatibility
ABS Non-Compatible
Buna-N Non-Compatible
EPDM Excellent
Graphite Excellent
HDPE Excellent
LDPE Good
Lexan

Non-Compatible
Neoprene Fair
Noryl

Non-Compatible
Nylon
 66
Excellent
Cross-Linked PE Excellent
Polypropylene Excellent
Polystyrene Non-Compatible
PVC Non-Compatible
Silicone Rubber Non-Compatible
Teflon

Excellent
Viton

Non-Compatible
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6” from surface to clean or attach
brush to scrub tough soils while flushing with
solvent to loosen and remove residues. Rinse
parts from top to bottom, allowing the liquid
to flush away flux residue.
AVAILABILITY
ES896BE
BrushClean
 System 200 ml
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-
TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 51%
HCFC-141b
HCFC-225 0.0%
0.0%
HFC
nPB
0.0%
0.0%
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (08/13)
Flux-Off
 and Chemtronics are registered trademarks
of Chemtronics. All rights reserved. BrushClean
, is a
trademark of Chemtronics. All rights reserved.
DISTRIBUTED BY: