Chemtronics Flux-Off No Clean Plus ES896BE - Manual

PRODUCT DESCRIPTION
Flux-Off

No Clean “Plus” Flux Remover is
an extra strength nonflammable solvent that
removes heavy and encrusted flux deposits.
This high pressure aerosol or bulk liquid
penetrates quickly to remove all types of flux,
oxide particles, dust, grease and oil, then
evaporates quickly leaving no residues.
 Powerful cleaner removes R, RA, RMA,
and No Clean fluxes
 Non-corrosive, safe for metals
 Flammable
 Extra-strength
 Fast drying
 Removes encrusted, baked-on fluxes
 All-Way Spray valve - even sprays upside
down
 BrushClean  System for scrubbing tough
soils
TYPICAL APPLICATIONS
Flux-Off

No Clean “Plus” Flux Remover
effectively cleans flux residues from:
 Chip Carriers
 Heat Sinks
 Metal Housings and Chassis
 Printed Circuit Boards
 Plugs
 Relays and Contacts
 Sockets
 Surface Mount Device Pads
 Solenoids
 Switches
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Flash Point
-20
°F
Evaporation Rate >1
(butyl acetate=1)
Specific Gravity 0.706
Appearance Clear, Colorless Liquid
Odor Ethereal
Solubility in Water Negligible
Kauri-Butanol
(KB) Number
86
Shelflife 5 years
COMPATIBILITY
Flux-Off

No Clean “Plus” Flux Remover,
like any cleaner, should be tested on a non-
critical area to determine plastics
compatibility prior to use. Not recommended
for ABS, acrylics, polycarbonates,
polystyrenes and PVC.
TDS 896BE
CHEMTRONICS
Technical Data Sheet
Flux-Off

No Clean “Plus”
Flux Remover