Chemtronics Electro-Wash Two Step ES125A - Manual (Page 2)

Material Compatibility
ABS Non-Compatible
Buna-N Fair
EPDM Good
Graphite Excellent
HDPE Excellent
Kynar

Excellent
LDPE Excellent
Lexan

Non-Compatible
Neoprene Fair
Nylon
 66
Excellent
Cross-Linked PE Excellent
Polypropylene Excellent
Polystyrene Non-Compatible
PVC Fair
Silicone Rubber Good
Teflon

Excellent
Viton

Fair
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Immersion and Ultrasonic Cleaning
Electro-Wash

Two Step can be used in
hot/cold cleaning. Parts to be cleaned should
be dipped completely in the solvent until all
contaminants have lifted from surface. Parts
could be hot air dried, rinsed with water or
wiped off.
Spot Cleaning
Electro-Wash

Two Step could be used for
spot cleaning using a brush or a spray
system.
AVAILABILITY
ES125A 1 Gal. Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 100%
HCFC 0.0% HFC 0.0%
CL Solv. 0.0% ODP 0.0%
CFC, HCFC, CL. SOLV., VOC, and HFC numbers
shown are the content by weight. Ozone depletion
potential (ODP) is determined in accordance with the
Montreal Protocol and U.S. Clean Air Act of 1990. The
ODP of this product is 0.0. It is the sum of the ODP of
the substances that may contribute to the depletion of
stratospheric ozone, based upon the weight of each
substance in the product’s formulation.
NOTE:
This information is believed to be accurate. It is intended
for professional end users having the skills to evaluate
and use the data properly.
CHEMTRONICS does not guarantee the accuracy of the
data and assumes no liability in connection with damages
incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. E (08/13)
DISTRIBUTED BY: