Chemtronics Electro-Wash Two Step ES125A - Manual

PRODUCT DESCRIPTION
Electro-Wash

Two Step is a heavy duty,
nonflammable, hot or cold immersion
cleaner designed to remove everything from
conformal coatings to all flux residues.
Electro-Wash

Two Step is easily rinsed
away with water or solvent, wiped away or
hot air dried, leaving the surface free of all
residue.
 Cleans and brightens solder joints
 Removes heavy oil and dirt deposits from
metal parts
 Removes all types of flux residues
 Miscible with water
 Low odor
 May be used in ultrasonic cleaner
 Removes SR, UR, AR conformal coating
 Contains no CFCs or HCFCs
 Contains no 1,1,1 Trichloroethane
 High flash point
TYPICAL APPLICATIONS
Electro-Wash

Two Step cleans and
degreases:
 Removes Adhesives
 Removes all Flux Types
 Lifts off Conformal Coating
 Cleans Contacts
 Dissolves Handling Oils
 Cleans Inks and Paints
 Metal Parts Cleaning
 Cleans Stencils
 Cleans Solder Paste Screens
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point
>400
°F
Solubility in Water Infinite
Specific Gravity
(water = 1@77
°F)
0.99 g/ml
Appearance Clear, Light Yellow
Liquid
Odor Mild
Surface Tension
(dynes/cm @ 150
°F)
30
Flash Point (TCC) 152
°F
Kauri-Butanol
(KB) Number 110
Shelflife 2 years after opening
COMPATIBILITY
Electro-Wash

Two Step Plus is generally
compatible with most materials used in the
electronics industry. With any cleaning
agent solvent/component compatibility must
be determined on a non-critical area prior to
use. Not recommended for acrylics, ABS
resins, polycarbonates and polystyrenes.
TDS # 0125A
CHEMTRONICS
Technical Data Sheet
Electro-Wash

Two Step