Chemtronics Electro-Wash PX ES1210A - Manual (Page 2)

Material Compatibility
ABS Good
Buna-N Good
EPDM Poor
Graphite Excellent
HDPE Excellent
Kynar

Fair
LDPE Fair
Lexan

Fair
Neoprene Fair
Noryl

Good
Nylon
 66
Excellent
Cross-Linked PE Excellent
Polypropylene Good
Polystyrene Non-Compatible
PVC Good
Silicone Rubber Non-Compatible
Teflon

Excellent
Viton

Excellent
Performance
Product Required for Oil Removal (mg solvent / 1
mg oil)
Electro-Wash PX
33
Conventional CFC
Cleaner
94
Water Soluble Oil Removal Rate (mg / in
∧
2 sec.)
Electro-Wash PX 11
Conventional CFC
Cleaner
5
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to clean. Wash parts
from top to bottom, allowing the liquid to flush away
dirt and dissolved grease. For precise application
use attached extension tube. Do not use on
energized equipment.
AVAILABILITY
ES810
5 oz Aerosol
ES1210 12.5 oz. Aerosol
ES110
1 Gal. Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions.
The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 100%
HCFC 0.0% HFC 0.0%
CL Solv. 0.0% nPB 0.0
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. C (08/13)
DISTRIBUTED BY: