Chemtronics Electro-Wash PX ES1210A - Manual

PRODUCT DESCRIPTION
Electro-Wash

PX is engineered for
removing contamination from fiber optic
connectors, modules, and cables, this
material is safe for most plastics.
Formulated with very low surface tension,
this high pressure aerosol formulation
flushes areas clean and evaporates instantly
leaving no residue.
 Removes oils, grease and other
contaminants
 Evaporates quickly
 Leaves no residues
 Has low odor
 Is non-corrosive
 Contains no CFCs or HCFCs
 Contains no 1,1,1 Trichloroethane
TYPICAL APPLICATIONS
Electro-Wash

PX cleans:
 Buffer Gel from Cable
 Contaminants from Transmitters,
Amplifiers and Transceivers
 Soils from Optical Interfaces,
Electronic Interfaces, and Drive
Circuitry
 Airborne Dirt from Printed Circuit
Boards
 Insulating Residue from Selector
Switches and Relays
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point 141
°F Initial
Vapor Density (air=1) >1
Solubility in Water 20%
Specific Gravity
(water = 1@77
°F)
0.70
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless Liquid
Odor Mild
Surface Tension
(dynes/cm @21.6
°C)
17.3
Flash Point (TCC) -20
°F
Kauri-Butanol
(KB) Number 50
COMPATIBILITY
Electro-Wash

PX is generally compatible
with most materials used in the fiber optics
industry. With any cleaning agent
compatibility must be determined on a non-
critical area prior to use.
TDS 0810
CHEMTRONICS
Technical Data Sheet
Electro-Wash

PX
Cleaner Degreaser