Chemtronics CircuitWorks® Silver Conductive Grease CW7100 User Manual

Page 2

COMPATIBILITY
CircuitWorks



Silver Conductive Grease is

generally compatible with metal, rubber,
and plastic. As with any compound,
compatibility with substrate should be
determined on a non-critical area prior to
use.

USAGE INSTRUCTIONS

Surface Preparation: For best results,
clean parts to be lubricated with
Chemtronics



Electro-Wash



PX cleaner in

order to remove any surface contamination
which may prevent adequate material
contact.

Thinning: Do not attempt to thin.

Application:
Syringe: Remove cap and gently press on
plunger. Apply CircuitWorks



Silver

Conductive Grease directly to surface or use
application tip.

Clean-Up: Electro-Wash



PX cleaner can

be used to remove trace residues. Excess
material may also be removed using a wipe
such as the Chemtronics



ControlWipes

.

Silver particles may stain porous materials.

WARNING:

To avoid shock or possible fire, stop power to
any system before applying conductive grease.
Insure positive and negative contacts remain
isolated. Improper use can result in shorting,
arcing, or shock.

AVAILABILITY

CW7100

6.5g / 0.23 oz. Syringe

TECHNICAL & APPLICATION
ASSISTANCE

Chemtronics provides a technical hotline to answer
your technical and application related questions.
The toll free number is: 1-800-TECH-401.

NOTE:

This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.

Chemtronics

, Electro-Wash and CircuitWorks are

 is a trademark of Chemtronics. All rights

reserved.

CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888

REV. H (08/13)

DISTRIBUTED BY: