Chemtronics CircuitWorks® Epoxy Overcoat (Adhesive Syringe) CW2500 - Manual (Page 5)

CircuitWorks® Epoxy Overcoat Part B
>120°C (>248°F)
Liquid. [Viscous liquid.]
Amine-like. [Slight]
Tan. Amber. [Light]
Boiling/condensation point
<1 (butyl acetate = 1)
9. Physical and chemical properties
Physical state
Evaporation rate
Odor
Color
:
:
:
:
:
Flash point : Open cup: >220°C (>428°F)
The product is stable.
Reactive or incompatible with the following materials: strong acids acids Organic acid
alkalis Alkaline. Strong oxidizing materials
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
Avoid increased storage temperature. Exposure to light
10. Stability and reactivity
Chemical stability
Conditions to avoid
Incompatible materials
Hazardous decomposition
products
:
:
:
:
Possibility of hazardous
reactions : Under normal conditions of storage and use, hazardous reactions will not occur.
11. Toxicological information
Acute toxicity
3,6-diazaoctanethylenediamin LD50 Dermal Rabbit 805 mg/kg -
LD50 Oral Rat 2500 mg/kg -
Product/ingredient name Result Species Dose Exposure
Conclusion/Summary : Not available.
Chronic toxicity
Conclusion/Summary : Not available.
Carcinogenicity
Conclusion/Summary : Not available.
Mutagenicity
Conclusion/Summary : Not available.
Teratogenicity
Conclusion/Summary : Not available.
Classification
3,6-diazaoctanethylenediamin - - - - - None.
Product/ingredient name ACGIH EPA NIOSH NTP IARC OSHA
Irritation/Corrosion
Product/ingredient name Result Score Exposure Observation
Conclusion/Summary : Not available.
Sensitizer
Conclusion/Summary : Not available.
Species
3,6-diazaoctanethylenediamin Eyes - Moderate irritant Rabbit - 24 hours 20
milligrams -
Eyes - Severe irritant Rabbit - 49 milligrams -
Skin - Severe irritant Rabbit - 24 hours 5
milligrams -
Skin - Severe irritant Rabbit - 490
milligrams -
5/9 2500-B 10/22/2013.