Chemtronics CircuitWorks® Epoxy Overcoat (Adhesive Syringe) CW2500 - Manual (Page 2)

CircuitWorks® Epoxy Overcoat Part B
2. Hazards identification
See toxicological information (Section 11)
Medical conditions
aggravated by over-
exposure Pre-existing disorders involving any target organs mentioned in this MSDS as being at
risk may be aggravated by over-exposure to this product. :
Over-exposure signs/symptoms
Ingestion : Adverse symptoms may include the following:
May cause burns to mouth, throat and stomach. gastrointestinal tract
Skin : Adverse symptoms may include the following:
Causes burns.
irritation
redness
sensitizer May cause allergic reactions in certain individuals.
Eyes : Adverse symptoms may include the following:
Causes eye burns.
pain or irritation
watering
redness
Inhalation : Adverse symptoms may include the following:
dizziness/vertigo
headache
nausea or vomiting
respiratory tract irritation
Target organs : Contains material which causes damage to the following organs: eye, lens or cornea.
Contains material which may cause damage to the following organs: skin.
3,6-diazaoctanethylenediamin 112-24-3 2 - 20
3. Composition/information on ingredients
Name CAS number %
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Wash out mouth with water. Do not induce vomiting unless directed to do so by medical
personnel. Never give anything by mouth to an unconscious person. Get medical
attention immediately.
Check for and remove any contact lenses. Immediately flush eyes with plenty of water
for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical
attention immediately.
In case of contact, immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Wash clothing before reuse. Clean
shoes thoroughly before reuse. Get medical attention immediately.
Move exposed person to fresh air. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.
Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention
immediately.
4. First aid measures
Eye contact
Skin contact
Inhalation
Ingestion
:
:
:
:
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it is
suspected that fumes are still present, the rescuer should wear an appropriate mask or
self-contained breathing apparatus. It may be dangerous to the person providing aid to
give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water
before removing it, or wear gloves.
2/9 2500-B 10/22/2013.