Satellite Hand Flush FF Bowl - Manual (Page 2)

PN 20947 REV D 10-18-11
2. Drill Pump Mounting Hole:
* Drill out 3-1/2 hole saw and 5/16 hole at location shown. Use top plate from #15029 pump assy box.
* Mark and drill the (3) remaining mounting holes using 5/16” drill bit.
3. Fasten Handle, Boot, Hose and Pump as Shown. NOTE: The pump assy on the MX3 need to be turn so
that the filter end is facing the tank side wall and NOT the toilet seat opening before mounting to tank.
4. Fasten Nipple and Washer to Bowl Assy as Shown. Place washer between nipple and nozzle. Thread
nipple on bowl assy nozzle.