Satellite Flush Western Bowl Roto Base User Manual

Page 2

PN 21147 REV B

Page 2

4. Fasten Filter Assy: Install the filter assy to hose as shown. NOTE: It works best to heat end of hose before

inserting fitting, be careful not to over heat, just heat to soften hose.

• Place filter assy in bottom of tank.

5. Fasten Hose and Fitting for Bowl assy as Shown: You may need to heat 3/4” hose end.

6. Cut slot for Hose and Elbow Clearance: Match tank to tank you have and cut slot as shown.

Note: The Maxim 2000 does not need a slot cut in tank.

7. Fasten bowl to Tank and Hose to Bowl as shown.

8. Fasten Decals as shown:
*Decal #4 Flushing Unit: Measure 7” down from top of door opening. Center and attach.
*Decal #3 Foot Flushing: 1st Decal: Flip toilet seat lid up and measure 2” above lid to bottom of decal and

install to back panel. 2

Decal: Measure up 39” from floor to bottom of decal, center and install on inside of

door attach. See below at reference pictures.

2530 Xenium Lane North, Minneapolis, MN 55441

Telephone: 763-553-1900 Fax: 763-553-1905

800-328-3332 /