Petsafe Stay+Play Wireless Fence PIF17-13478 - Manual (Page 6)

www.petsafe.net 7 6 www.petsafe.net
EN
ES
FR
IT
NL
DE
B
O
U
N
D
A
R
Y
Z
O
N
E
Note: In many
neighbourhoods, nearby
property lines may limit
how large the Pet Area
can be.
Maximum
32 m range
(53 average steps)
P e T a r e a Transmitter
How the System Works
The PetSafe ® Stay + Play Wireless Fence™ has been proven safe, comfortable, and effective for all pets over
2.3 kg. The system works by transmitting a radio signal up to 32 m in all directions. You temporarily define the
Pet Area with Boundary Flags for a visual aid in training your pet. Your pet wears a Receiver Collar with Contact
Points that touch his neck, and, once trained, is allowed to roam freely within the Pet Area. When your pet reaches
the Boundary Zone, the Receiver Collar gives a warning beep before delivering a safe Static Stimulation through
the Contact Points to get his attention until he returns to the Pet Area.
Key Definitions
Pet area: The area around the Transmitter where your pet can roam freely.
Boundary Zone: A 0.6 m to 1 m wide ring outside the Pet Area where your pet’s Receiver Collar will begin to
beep and then begin to deliver a Static Stimulation. The stimulation will start in the Boundary Zone and continue
anywhere beyond the Pet Area. Note: The Receiver Collar is equipped with a safety time-out feature that will stop
correcting after 15 seconds if your pet remains outside the Pet Area.
receiver Collar: Receives the radio signal from the Transmitter.
receiver Indicator Light: Indicates the level of
stimulation at which the Receiver Collar is set. This
light also indicates battery status.
Contact Points: Deliver the safe Static
Stimulation when your pet moves into the
Boundary Zone.
Mode Button: Turns Receiver on/off
and adjusts the level of Static Stimulation
your pet received outside of Pet Area.
receiver Charger: Charges the
batteries inside the Receiver Collar.
receiver Charge Jack: Connection
point for charging Receiver battery.
receiver Collar
Receiver
Indicator
Light
Contact Point
Mode Button
Receiver
Charge Jack