Maintaining and servicing, Warning, Glass – Outdoor Great Room Intrigue Table Fire Pit User Manual
Page 17: Venturi disc, Burner assembly, Valve and remote assembly

Page | 17
Intrigue 90215 REV E 6/7/2012
7
Maintaining and Servicing
Although the frequency of appliance servicing and
maintenance will depend on the use and type of
installation, a qualified service technician should
perform an appliance checkup annually.
Storage of an appliance indoors is permissible only
if the cylinder is disconnected and removed from
the appliance.
WARNING
Annual inspection by a qualified
technician is recommended.
Check:
Obstructions of combustion and
ventilation air.
Condition of burner assembly.
Burner ignition and operation.
Gas connections and fittings.
Risk of:
Fire
Delayed ignition or explosion
Exposure to combustion fumes
Odors
WARNING
Risk of injury or property damage
Before servicing:
Turn off utilities to appliance.
Ensure the appliance is completely cooled.
Inspect
Maintenance Tasks
Glass
Inspect glass for cracks or chips
Carefully remove glass and clean
Venturi Disc
With glass removed, inspect venturi disc for debris
or damage.
Clean disc using a soft rag and non-abrasive cleaner
Burner Assembly
Inspect for damage or debris.
Carefully wipe down surface being careful not
to bend or break electrodes
Valve and remote
assembly
Inspect for damaged or disconnected wires
Ensure correct operation of ignition and remote system
Check for gas leaks and tighten connections