Outdoor Great Room Intrigue Table Fire Pit - Manual (Page 14)

Page | 14 Intrigue 90215 REV E 6/7/2012
5
Operating Your Intrigue
WARNING
Improper installation, adjustment,
alteration, service, or maintenance can
cause injury or property damage. For
assistance or additional information consult
a qualified installer, service agency, or the
gas supplier.
WARNING
Fire Risk
Burn Risk
HOT! DO NOT TOUCH.
SEVERE BURNS MAY RESULT.
CLOTHING IGNITION MAY RESULT.
Glass and other surfaces are hot during operation
and cool-down.

Children and adults should be alerted to the
hazards of high surface temperatures and should
stay away to avoid burns or clothing ignition.

Young children should be carefully supervised
when they are in the area of the appliance

Installation and repair should be done by a
qualified service person. The appliance should be
inspected before use and at least annually by a
qualified service person. More frequent cleaning
may be required as necessary. It is imperative that
control valve, burner, and air passageways in
venturi top be kept clean.
Before igniting your Intrigue for the first time:
The power switch included with your Intrigue is
labeled with three symbols. These indicate
different modes of operation. Make sure burner is
set to OFF before installing propane tank.
Remote Operation
Power/Flame OFF
Power/Flame ON (manual Ignition)
Programming a Remote:
An optional remote burner controller can be purchased for
this product.

Begin with the power switch in the Remote Operation
position.

To program your remote, locate the program button on
the Control Module (shown at right) and press it with a
paper clip or similar small object. A single chirp should be
heard.

Press the SET button on your remote and hold until two
chirps are heard from the Control Module. The remote is
now paired with your burner.
Program button
LED indicator
Speaker
SET