Dell PowerEdge 4350 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3.
Perform the steps in the next section, "Checking Connections and Switches."
Is the problem resolved?
Yes. The power to the computer system was faulty, or the connections to the
computer system were loose. You have fixed the problem.
No. Go to step 4.
4.
Follow the procedures described in "Look and Listen" found later in this chapter.
Did the computer system complete the boot routine?
Yes. Go to step 5.
No. A serious malfunction may have occurred. Go to Chapter 12, "Getting Help."
5.
Did you receive a system message or beep code?
Yes. Go to Chapter 3, "Messages and Codes."
No. Go to step 6.
6. Verify the settings in the System Setup program as explained in "The System
Setup Program" found later in this chapter.
Is the problem resolved?
Vfes. The system configuration information was incorrect. You have fixed the
problem.
No. Go to step 7.
7 Run the Dell Diagnostics as described in Chapter 5, "Running the Dell
Diagnostics."
2-2 Dell PowerEdgei350 ^tems Installation and Troubleshooting Guide