Wine Guardian Wine Cellar Cooling Systems 50Hz (WG 175) - Manual (Page 42)

Inspection and Start-up Checklists
Receiving and Inspecting
 Unit received undamaged
 Unit received complete as ordered including accessories

Handling and Installing
 Unit mounted on solid level surface

 Sufficient space allowed for access to unit and accessories

Proper electrical service
provided

 Hot water provided to humidifier

 Drain lines and trap installed properly

 Ductwork, fittings and grilles installed properly

 All cold duct surfaces insulated

 Low ambient control included if freezing condition present

No obstructions to air
flow to condenser

Starting-up the Unit
 General visual inspection looks good

All wiring connections checked

 All ducts, grilles and panels in place
 Start unit

 Check ducts and connections for air leaks
 Balance air distribution

 Confirm condenser airflow is unrestricted
 Verify cooling and heating operation

 Check for excessive noise or vibration
39