Wine Guardian Wine Cellar Cooling Systems 50Hz (WG 175) - Manual (Page 37)

Alarm Codes
High temperature
alarm
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Hi Temp” will remain on
screen until temperature falls below the High
Temperature Alarm set point (Setting 3).
Low temperature alarm
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Lo Temp” will remain on
screen until temperature rises above the Low
Temperature Alarm set point (Setting 2).
High humidity alarm Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Hi Hum” will remain on screen
until humidity falls below the High Humidity Alarm
set point (Setting 5).
Low humidity alarm Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Lo Hum” will remain on screen
until humidity rises above the Low Humidity Alarm
set point (Setting 4).
Open Fault Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication.
THIS ALARM FORCES THE SYSTEM TO
SHUT DOWN. “Alarm” will remain on screen until
the High Pressure reset switch has been reset. See the
trouble shooting guide page 47 for “Instructions to
Reset High Pressure Switch”
34