Welch Allyn GCX M-Series Wall Mount Kit for Welch Allyn Propaq CS Monitor - Installation Guide - Manual

DU-PR-0013-06 Rev A 2/28/07 GCX Corp Page 1 of 5
Installation Guide
M-Series Wall Mount Kit for Welch Allyn Propaq CS EMP Monitor
The purpose of this guide is to:
1. Describe installation of the Wall Mount Kit and mounting of monitor and power supply.
2. Describe adjustment of tilt and tilt tension.
Parts Reference
The following parts and hardware are included in this installation kit (hardware not shown):
Tools Required: Phillips screwdriver (not provided), 1/8'' and 5/32'' hex wrenches (provided), and 1/2'' [13mm] socket
wrench or nut driver (not provided).
Installing the Wall Mount Kit
1. Install Wall Channel in accordance with GCX Wall Channel Installation Instructions (DU-WC-0002).
Item # Description Qty
1 Wall Channel, 19'' (includes hardware and instructions) 1
2 Utility Basket, Channel Mount 1
3 Adjustable Stop 1
4 M-Series Arm, 8'' 1
5 Sub Plate 1
6 #6-32 x 3'' Pan Head Machine Screw (PHMS) 4
7 Mounting Adapter 1
8 #8-32 x 1/4'' Pan Head Machine Screw (PHMS) 4
9 #8 x .030 Flat Washer 4
10 1/8'' Hex Wrench 1
11 5/32'' Hex Wrench 1
12 Channel Cover (includes instruction) 1
4
2
5
7