Welch Allyn Connex Vital Signs Monitor, Radio Software Configuration - Installation Guide - Manual (Page 9)

Radio configuration guide 80018044 Ver B 9
b. Touch Advanced.
c. Enter 6345 in the Advanced setting code field and touch OK.
d. Touch Network.
e. Touch Radio.
5. Select WPA2-AES in the Authentication type menu.
6. Select TTLS or PEAP in the EAP Type menu.
7. Enter your EAP identity. The default identity is “vitalsigns.”
8. Enter your EAP password. The default password is “password.”
9. Click Configure radio.
Fast-roaming settings
The default fast-roaming setting is OKC/PKC. The radio also supports PMK caching.
To change your fast-roaming settings, do the following:
1. Create a simple wireless network. See “Creating a simple wireless network setup to
install the radio software” on page 2.
2. Connect to the radio configuration tool user interface.
3. Select the EAP settings page.
Under Roaming Type, select PMK caching or OKC/PKC (default).