Certificate requirements – Welch Allyn Connex Vital Signs Monitor, Radio Software Configuration - Installation Guide User Manual
Page 6
6
80018044 Ver B
Welch Allyn
Certificate requirements
There are requirements for both server and client customer certificates.
Server certificate requirements
Client certificate requirements
Loading customer certificates
To upgrade the certificates on your device radio, do the following:
1.
Create a simple wireless network. See
“Creating a simple wireless network setup to
2.
Connect to the radio configuration tool user interface.
3.
Select the Customer CA certificate chain page and fill in the Custom Certificate
Chain field by doing the following:
a.
Click Browse and navigate to the certificate file location.
b.
Select the file, and click Open.
c.
Click Apply.
4.
Select the Customer device certificate / key page and fill in the following fields:
a.
Click Browse and navigate to the certificate file location.
b.
Select the file, and click Open.
c.
Enter your password.
d.
Click Apply.
5.
Select Certificate status and scroll to the Customer CA Certificate Chain and
Customer Device Certificate and Private Key fields to verify that the certificates
were loaded.
Caution Only customer certificates and radio software should be changed using
the radio configuration tool user interface. All other configuration changes must
be completed through the device user interface. See the device directions for
use for more information.
Extended usage extension: Server authentication (1.3.6.1.5.5.7.3.1)
File format: PEM
Extended usage extension: Client authentication (1.3.6.1.5.5.7.3.2)
File format: PKCS#12
Note
Do NOT force reauthentication.
Note
Do NOT force reauthentication.