Welch Allyn Connex ProBP 3400 Digital Blood Pressure Device - Quick Reference Guide - Manual (Page 3)

ProBP 3400 tab
The ProBP 3400 tab is the single access point to all device information and actions that you may perform on a ProBP
3400 (except product license installations – see Install a license for details. It is divided into two main areas: a
general device information pane and a secondary tabbed pane.
General device information pane
The general device information pane shows device identification, location information, and communication addresses.
The area may also contain special controls for actions to perform on the device.
To align the ProBP 3400 date and time with the PC date and time, click Synchronize.
Device information tab
The device information tab displays the configuration of the device, including installed modules, installed firmware,
and hardware versions. The battery does not have a firmware version. The manufactured date is determined from the
serial number.
Directly under the configuration information, two panes display warranty and repair information for the device.
Click on a row to select it. Additional product specific information for the selected module displays in the detail pane
to the right. Refer to the specific device help file within the Welch Allyn Service Tool.
Upgrade tab
The Upgrade tab lists the device module’s current firmware version number, and identifies modules with firmware
available for upgrade.
Select a module, and then click Upgrade or select the main device, and then click Upgrade All to install available
firmware to your product. Follow onscreen instructions to complete the upgrade process.
While the firmware is upgrading, the Welch Allyn Service Tool application displays a progress indicator. During the
upgrade process the ProBP 3400 powers on and off. This is normal. You cannot perform other functions until the
upgrade is complete.
OpenTopic | ProBP 3400 tab | 3