Welch Allyn Connex VM data management system - User Manual - Manual (Page 7)

Getting started
Start the Connex VM program
1. Start the Connex VM program
• On the Windows desktop, double-click the Welch Allyn Connex Workstation icon .
• From the Windows Start menu, click Start > All Programs > Welch Allyn > Connex
VM.
2. If prompted, log on.
The Home page appears. You can now perform tasks according to the permissions that have
been set up for you.
End your Connex VM session
Go to the menu bar and click the desired command.
•
File > Exit closes the Connex VM program.
• File > Log off ends your session and leaves the Connex VM program ready for the next
user to log on.
3